CBC ZR-DH1621NP Guia de Instalação descarregar pdf (Página 18)

TCOMMAND OPERATING INSTRUCTIONS V1.3 09-03-2009 V18 SOFTWARE.DOC

12 FAST DVR

Connection between T-Command (keyboard port) and FAST DVR COM port.

Note the T-Command port 1 will need to configured for RS232 refer to fig 4 page 7.

T-Command RJ45 FAST DB9-F

GREEN (4) 2 (RXD)

BROWN PAIR (7 & 8) 5 (GND)

Internal SW1 switch settings – ALL OFF.

LIVE - PTZ CONTROL

BBV T Command

Cam

001

Mon

001

FOCUS+ AUX1 PRESETIRIS+

FOCUS+ AUX2IRIS-

8 97

REPLAYCAMERA MONITOR

LIVE MODE – ON POWER UP.

This screen switches the DVR monitor into LIVE mode allowing camera selection and PTZ control using the

joystick. Focus and Iris, if supported, can be controlled using FOCUS +/- and IRIS +/-. AUX 1 and AUX 2 are

used to toggle PTZ auxiliary outputs.

GOTO PRESET POSITION

Press the PRESET pad followed by the GOTO pad.

Using the numeric pads to select the preset number required and then press the ENTER pad to recall the camera

to the preset. OR press the EXIT pad to ignore the preset command.

Example PRESET, GOTO, 3, ENTER. This will send the Camera to Preset 3.

SAVE PRESET POSITION

Press the PRESET pad followed by the SAVE pad.

Using the numeric pads to select the preset number required and then press the ENTER pad to save the current

position OR press the EXIT pad to ignore the save preset command.

Example PRESET, SAVE, 4, ENTER. This will save the new position as Preset 4.

1 2 ... 13 14 15 16 17 18 19 20

Sem comentários

CBC ZR-DH1621NP Guia de Instalação Página 18