CBC ZR-DH1621NP Guia de Instalação descarregar pdf (Página 16)

TCOMMAND OPERATING INSTRUCTIONS V1.3 09-03-2009 V18 SOFTWARE.DOC Page 16

PTZ Screen.

This screen is displayed after pressing the PTZ key. The PTZ toggle command is sent to the DVR.

TOUR, AUTO, PTZ (toggle PTZ mode), IRIS, FOCUS keys mimic front panel although at present IRIS and

FOCUS are not supported in the DVR protocol and do not function.

CAMERA selects the Camera Select screen.

PRESET selects the Preset screen but does not active the DVR OSD Preset menu.

EXIT returns to the Main screen.

Play Screen.

This screen is displayed after pressing the PLAY key from another screen.

RW <<, STOP, FF >>, RPLAY <, PAUSE ||, PLAY > PANORAMA, FULLZOOM, DISPLAY and PIP mimic

the DVR front panel keys.

CAM selects the Camera Select screen.

PASSWORD selects the Password screen.

EXIT returns to the Main screen.

Camera or Unit Select Screen.

This screen is displayed after pressing the CAM, CAMERA or UNIT key on another screen.

1 to 16 keys mimic the DVR front panel keys.

When selected from the UNIT key the number key pressed selects the unit number of the DVR to be

controlled.

The number key pressed is displayed at the top of the keypad screen in the appropriate window.

EXIT returns to the Main screen.

Preset Screen

This screen is displayed after the PRESET key is pressed on the PTZ screen.

A Preset is selected by pressing the appropriate number keys followed by GOTO i.e. Press 2 then 7 followed

by GOTO to select Preset 27.

The selected Preset will be displayed at the bottom of the keypad screen before the GOTO key is pressed. If

this number is incorrect press CLEAR to clear.

To program/set a Preset first move the camera to the desired position. Then enter the desired numbers

followed by SET i.e. Press 3 then 5 followed by SET to program/set Preset 35.

Preset numbers greater than 99 will not be accepted or actioned

1 2 ... 11 12 13 14 15 16 17 18 19 20

Sem comentários

CBC ZR-DH1621NP Guia de Instalação Página 16