CBC ZR-DH1621NP Guia de Instalação descarregar pdf (Página 13)

TCOMMAND OPERATING INSTRUCTIONS V1.3 09-03-2009 V18 SOFTWARE.DOC Page 13

Within the DX1 there is an Engineering Menu, to access this menu you will need to press AND HOLD the

PRESET pad, This will then bring you to the PIN number screen. The Password is 2325.

Calibrate Joystick - this will allow re-calibrating the Joystick. You will go straight to a YES NO screen you

will need you press the YES key to continue. Then you will need to follow the instructions that come up

on the screen. Or pressing NO will return you to the DX1 Engineering Menu screen.

The Multiscreen Input Function allows the on site DVR monitor output to be fed back into a spare camera

input of the Matrix. You will go straight to a YES NO screen you will need you press the YES key to

continue. Then you will need to press the

–

pads until you have the correct camera input selected.

Or pressing NO will return you to the DX1 Engineering Menu screen.

Screen Calibration - this will allow re-calibrating the Touch Screen part of this keypad. You will go

straight to a YES NO screen you will need you press the YES key to continue. Then you will need to

follow the instructions that come up on the screen. Or pressing or pressing NO will return you to the DX1

Engineering Menu screen.

Config PTZ/Static - will allow toggle between DOME or STATIC you will go straight to a YES NO screen

you will need you press the YES key to continue. Then you can set up each camera input individual. Or

pressing NO will return you to the DX1 Engineering Menu screen.

Access TX1500 Menus - will allows full access to the Tx1500 menu without the normal Tx1500 password

To navigate the Tx1500 menu you will need to use the joystick tilt up & down to move up & down then

pan right & left to move right & left press

pad to select within the Tx1500 menu.

Max. Camera - this will allow to select the maximum number of cameras the T-Command can Display on

the touch screen. You will go straight to a YES NO screen you will need you press the YES key to

continue. Then you are given 3 options 1 – 24, 1 – 36 or 1 - 48. To navigate the menu you will need to

use the joystick tilt up & down to move up & down then pan right to select Or pressing NO will return you

to the DX1 Engineering Menu screen.

Keypad Type – this will allow to select the type of keypad you wish the keypad to be. You will go straight

to a YES NO screen you will need you press the YES key to continue. You will be given four options:

TX1500 This is to be selected when being used with the BBV Tx1500, FBM Video Matrix & Pick A

Point.

Dixons DX1 This is to be selected when being used with the BBV Tx1500 in a retail application.

Ganz DVR This is to be selected when being used with the. GANZ ZR-DH1621NP.

Fast DVR This is to be selected when being used with the Fast DVR.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

CBC ZR-DH1621NP Guia de Instalação Página 13